Sparmadillo| Roll Up Spa Cover| Wooden Batten Logo

FAQs

Common questions we get:

How much does a Sparmadillo spa cover cost?

This will depend on dimensions, but a custom-built cover for a pool around 2m x 2m will cost $1,500 + GST.

What kind of maintenance is required?

Over time, the timber battens will fade and will need to be re-oiled, especially if the timber is exposed to the elements. Most oils would just require the battens to be clean and dry before re-applying.

The timber battens on a Sparmadillo cover are oiled using 2 coatings of Cutek Extreme CD50 with a ‘tussock’ tint – see Cutek’s site for more information.

How good is the insulation?

A roll-up cover has 20mm of wool insulation, which doesn’t quite match the insulative properties of a new thick polystyrene cover – but is superior to an older waterlogged polystyrene cover.

To increase insulation, a layer of EVA foam can be added to float on the water’s surface underneath the roll-up cover. Our tests have shown that Sparmadillo cover combined with a layer of floating EVA foam provides the same insulation as a new standard type of spa cover with 100mm thick polystyrene.

Where can I roll the cover when using the pool?

When in use, you can roll your cover to the edge of the pool, roll it completely off the onto the deck, or preferably onto a shelf level with the top of the pool.

Do Sparmadillo covers comply with NZ spa pool covers standards?

In the case of a lockable cover, the cover needs to be able to support a 20kg load, allow water run-off, be secure with straps and lockable fasteners, and include water signage.

Sparmadillo covers comply with these requirements, and can be supplied with d-rings and locking clips to be made lockable.

There are minor variations between different local authorities, but generally, spa pools should either:

  • Be fenced to prevent entry.
  • Or, if the pool is 5 square meters or less and has sides at least 760mm high, have a lockable cover.
Can I get my cover delivered?

Sparmadillo covers can be picked up from our premises in Rotorua or freighted via our shipping partners like Fliway. Freight quotes are available upon request.

What about export overseas?

We are looking into how to export overseas, but overseas shipping is not available at this time.

What size pool is suitable?

The maximum size for our laminated timber battens is 2400mm, which means the maximum pool size is 2300mm from outer edge to outer edge.

What about a cover for my swim spa?

Many swim spas will be outside the maximum size for a Sparmadillo, but two covers that meet in the middle could work for some smaller sized swim spas.

Does the cover come with a warranty?

Sparmadillo spa covers are covered with a warranty to repair or replace any faulty product within 12 months of purchase.

Can you make the cover with different timber or a different colour lining?

NZ Timber & Wool

Sparmadillo roll-up covers are one of a range of products from MAKO – a New Zealand company specialising in making sustainable, high-quality outdoor living products form locally sourced materials; showcasing the qualities of NZ timbers and wool.

We have an in-house team to design, test, and manufacture our products in our factory in Rotorua, New Zealand. We also have examples on display and being tested in high-use conditions at out site at ZORB Rotorua.

Have a specific question or need help? Flick us a message!


    Custom-made to fit your pool

    We create custom-made covers to fit non-standard measurements to ensure efficiency & security.

    Environmentally sustainable

    Sparmadillo covers are created with environmentally-friendly materials and processes.

    Made in New Zealand

    All Sparmadillo covers are manufactured and assembled in New Zealand

    Nationwide shipping

    We ship anywhere across Aotearoa, North or South Island, within just a few days!